Cookie Img
Shree Extrusions Limited
Shree Extrusions Limited Banner
Home » Products » Leaded Copper » C19160 Leaded Nickel Copper

C19160 Leaded Nickel Copper

C19160 Leaded Nickel Copper
C19160 Leaded Nickel Copper
Send Inquiry
Product Code : C19160
Brand Name : Shree Extrusions Limited
Product Description

Backed with knowledgeable team of technocrats, we manufacture, export and supply a wide gamut of Leaded Nickel Copper. This metal is widely used for installation in different commercial and industrial sectors in places where leak-proof joints are needed. The provided metal is manufactured by our trained team of technocrats using optimal quality metal alloys, the offered metal is also vigorously tested on set quality parameters to enhance its flawlessness. Available in various designs, sizes and other specifications to meet the exact requirements of clients, this Leaded Nickel Copper is made available at most cost-effecting rates.


  • High conductivity

  • Precise melting point

  • Dimensional accuracy

  • Corrosion resistance



C19160 Leaded Nickel Copper

C19160 Leaded Nickel Copper alloy is a free-cutting bronze alloy, which is mainly used for manufacturing connectors in the electronics industry. The alloy is high on machining ability and is appreciated for high strength, electrical conductivity and corrosion resistance.

Electrical Applications : Contacts, Sockets, Connector Pins
Density Applications : 0.320 lb/in3 at 68 F

Chemical Composition:

  Cu (1) Fe Pb Ni P Sn Zn

Min/Max Rem. 0.05 .8 - 1.2 .8 - 1.2 .15 - .35 0.05 0.5

Nominals 97.8 - 1 1 0.2 - -

Joining Technique Suitability
Brazing Good
Butt Weld Fair
Capacity for Being Cold Worked Good
Capacity for Being Hot Formed Poor
Coated Metal Arc Welding Not Recommended
Gas Sheilded Arc Welding Not REcommended
Machinability rating 80
Oxyacetylene Welding Not Recommended
Seam Weld Not Recommended
Soldering Excellent
Spot Weld Not Recommended

Physical Properties:

US Customary Metric
Melting Point - Liquidus 1980 F 1082 C
Melting Point - Solidus 1900 F 1038 C
Density 0.320 lb/in³ at 68 F 8.88 gm/cm³ @ 20 C
Specific Gravity 8.88 8.88
Electrical Conductivity 55 %IACS @ 68 F 0.318 MegaSiemens/cm @ 20 C
Thermal Conductivity 146 Btu ?? ft/(hr ?? ft2??oF)at 68F 253.0 W/m ?? oK at 20 C
Modulas of Elasticity in Tension 18000 ksi 124100 MPa
Modulus of Rigidity 6000 ksi 12410 MPa

Sizes Available:
HOLLOW RODS Min Bore Size 20 mm and Max OD 100 mm
ROUND RODS 8mm To 100 mm
HEX 10mm To 60mm
SQUARE 10mm To 60mm
FLAT 10mm Min Thickness and max Width 120mm
BILLETS Up to 200 mm
INGOTS As per Specification

Shree Extrusions Limited

SHREE EXTRUSIONS LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.