Cookie Img
Shree Extrusions Limited Banner
Home » Products » Silicon Bronze » C65100 Low Silicon Bronze

C65100 Low Silicon Bronze

C65100 Low Silicon Bronze
C65100 Low Silicon Bronze
Product Code : C65100
Product Description

Backed with experienced team of technocrats, we manufacture, export and supply a wide gamut of C65100 Low Silicon Bronze. The provided product is widely used in various industries for manufacturing variety of components. The offered product is manufactured by our trained team of professionals using utmost quality metal alloys, this product is also tested on set quality parameters to enhanced their flawlessness. Available in various specifications to meet the wide requirements of clients, this C65100 Low Silicon Bronze is made available at competitive rates.

Features:

  • Robustly constructed

  • High strength

  • Dimensional accuracy

  • Corrosion resistance

C65100 Low Silicon Bronze "B"



















C65100 is an engineering alloy resistant to corrosion as copper itself, but much stronger, and with good fatigue endurance. The alloy is appreciated for its brazing ability, strength, corrosion resistance and electrical properties and serves as one of the most weldable copper alloys. The alloy can be joined by using resistance welding, soldering or brazing. The alloy is joined by gas shield arc welding, spot welding and also by oxyacetylene welding.

Typical Uses :
Electrical: Conduit, Pole Line Hardware, Motor, Rotor Bars
Fasteners: Bolts, Cable Clamps, Cap Screws, Machine Screws, Nuts, Rivets, U Bolts, Fasteners, Screws
Industrial: Oil Refinery Plumbing Tube, Heat Exchanger Tube, Welding Rod, Hydraulic Pressure Lines
Marine:  Hardware
Equivelent Specifications:





Specifications Designation





ISO CuSi1





European CuSi1





Czech Republic CuSi1






Chemical Composition:
  Cu Fe Pb Mn Si Zn
Min/Max Rem 0.8 0.05 0.7 0.80 - 2.0 1.5
Nominals 98.5 - - - 1.5 -

Specifications:
End Product Specification
Bar ASME SB98, ASTM B98
Bolts ASTM F468
Nuts ASTM F467
Pipe ASTM B315
Plate ASTM B96
Plate, Clad ASTM B432
Rod ASME SB98, ASTM B98
Screws ASTM F468
Shapes ASME SB98, ASTM B98
Sheet ASTM B96
Strip ASTM B96
Studs ASTM F468
Tube ASTM B315
Wire ASTM B99, B105

Fabrication:
Joining Technique Suitability
Brazing Excellent
Butt Weld Excellent
Capacity for Being Cold Worked Excellent
Capacity for Being Hot Formed Excellent
Coated Metal Arc Welding Fair
Gas Shielded Arc Welding Excellent
Machinability Rating 30
Oxyacetylene Welding Good
Seam Weld Good
Soldering Excellent
Spot Weld Excellent

Physical Properties:
Product Property US Customary Metric
Coefficient of Thermal Expansion 9.9 ·10-6 per oF (68-212 F) 17.8 ·10-6 per oC (20-100 C)
Density 0.316 lb/in3 at 68 F 8.75 gm/cm3 @ 20 C
Electrical Conductivity 12 %IACS @ 68 F 0.07 MegaSiemens/cm @ 20 C
Electrical Resistivity 86.4 ohms-cmil/ft @ 68 F 14.36 microhm-cm @ 20 C
Melting Point - Liquidus 1940 F 1060 C
Melting Point - Solidus 1890 F 1032 C
Modulas of Elasticity in Tension 17000 ksi 117000 MPa
Modulus of Rigidity 6400 ksi 44130 MPa
Specific Gravity 8.75 8.75
Specific Heat Capacity 0.09 Btu/lb/oF at 68 F 377.1 J/kg · oK at 293 K
Thermal Conductivity 33.0 Btu · ft/(hr · ft2·oF)at 68F 57.1 W/m · oK at 20 C

Sizes Available
ROUND RODS/BARS 8mm To 70 mm
HEX 10mm To 60mm
SQUARE 10mm To 60mm
FLAT 10mm Min Thickness and max Width 120mm
BILLETS Up to 200 mm
INGOTS As per Specification

Shree Extrusions Limited

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



SHREE EXTRUSIONS LTD. All Rights Reserved.