Cookie Img
Shree Extrusions Limited
Shree Extrusions Limited Banner
Home » Products » Silicon Bronze » C63600 Silicon Aluminum Bronze

C63600 Silicon Aluminum Bronze

C63600 Silicon Aluminum Bronze
C63600 Silicon Aluminum Bronze
Product Code : C63600
Product Description
C63600 Silicon Aluminum Bronze





















The C63600 Silicon Aluminum Bronze possess good hot and cold workability, forging ability. The alloy is fabricated by bending, coining, drawing and upsetting, hot forging and pressing, knurling, roll threading, shearing, spinning, swaging, and stamping.

Typical Uses :
Electrical :  Cold Headed Nuts, Cable Connectors, Components for Pole Line Hardware
Fasteners :  Screw Machine Products, Bolts
Industrial :  Valve Components, Nuclear Power Service

Chemical Composition:
  Al As Cu Fe Pb Ni Si Sn Zn
Min/Max 3.0 - 4.0 0.15 Rem 0.15 0.05 0.15 0.7 - 1.3 0.2 0.5
Nominals 3.5 - 95.5 - - - 1 - -

Physical Properties:
Product Property US Customary Metric
Coefficient of Thermal Expansion 9.4 ·10-6 per oF (68-572 F) 16.9 ·10-6 per oC (20-300 C)
Density 0.301 lb/in3 at 68 F 8.33 gm/cm3 @ 20 C
Electrical Conductivity 12 %IACS @ 68 F 0.07 MegaSiemens/cm @ 20 C
Electrical Resistivity 86.4 ohms-cmil/ft @ 68 F 14.36 microhm-cm @ 20 C
Melting Point - Liquidus 1890 F 1032 C
Modulas of Elasticity in Tension 16000 ksi 110000 MPa
Specific Gravity 8.33 8.33
Thermal Conductivity 33.0 Btu · ft/(hr · ft2·oF)at 68F 57.1 W/m · oK at 20 C

Fabrication:
Joining Technique Suitability
Brazing Not Recommended
Butt Weld Fair
Capacity for Being Cold Worked Excellent
Capacity for Being Hot Formed Fair
Coated Metal Arc Welding Fair
Gas Shielded Arc Welding Fair
Machinability Rating 40
Oxyacetylene Welding Not Recommended
Seam Weld Fair
Soldering Not Recommended
Spot Weld Fair

Sizes Available
ROUND RODS 8mm To 70 mm
HEX 10mm To 60mm
SQUARE 10mm To 60mm
FLAT 10mm Min Thickness and max Width 120mm
BILLETS Up to 200 mm
INGOTS As per Specification

Shree Extrusions Limited

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



SHREE EXTRUSIONS LTD. All Rights Reserved.