Cookie Img
Shree Extrusions Limited Banner
Home » Products » Silicon Bronze » C65500 High Silicon Bronze

C65500 High Silicon Bronze

C65500 High Silicon Bronze
C65500 High Silicon Bronze
Product Code : C65500
Product Description

Relying on our high-tech manufacturing set up, we are offering superlative quality gamut of C65500 High Silicon Bronze. The provided bronze is widely demanded in different industries for manufacturing pole-line hardware, nuts, bolts, screws and many more. The offered bronze is manufactured by our skilled professionals using utmost quality metal ally and progressive manufacturing techniques in tandem with set international quality standards. This C65500 High Silicon Bronze is made available in different finishes, dimensions and thicknesses as per clients' requirement at market leading rates.

Features:

  • High tensile strength

  • Dimensional accuracy

  • Corrosion resistance

  • Excellent hardness

C65500 High Silicon Bronze "A"
















ASTM B96, ASTM B248, ASTM B98
The silicon bronze C65500 is a high strength, engineering alloy with having resistance against corrosion from fresh and salt water, acids, alkalies, salts and organic chemicals. The alloy is not suitable to be used with sulfides, nitric acid, acid chromates or oxidizing salts such as ferric chloride. The alloy possess strength, resilience and formability and is non-sparking, galling resistant and fatigue resistant.

The applications of C65500 include electrical conduit, pump shafts, valve stems, tie rods, fasteners, marine and pole-line hardware, nuts, bolts, screws, rivets, nails, bushings, screen cloth and wire.

Typical Uses :
Electrical: Sculptures,Electrical,Pole Line Hardware,Motors,Rotor Bar
Fasteners: Screws,Rivets,Burrs,Nuts,Nails,Cotter Pins,Clamps,Bolts,Hinges
Industrial: Screen Cloth,Wear Plates,Screen Plates,Shafting,Wire,Welded Pressure Vessels,Oil Refinery Plumbing Tube,Bearing Plates,Butts
Marine:  Vessel Hardware ,Propeller Shaft
Equivelent Specifications:





Specifications Designation





ISO CuSi3Mn1





European CuSi3Mn1





BS CS 101





Russian BrKMo3-1






Chemical Composition:
  Cu Fe Pb Mn Ni Si Zn
Min/Max Rem 0.8 0.05 0.50 - 1.3 0.6 2.8 - 3.8 1.5
Nominals 97 - - 0.9
3 -

Specifications:
End Product Specification
Bar SAE J463, J461
Bar, Forging ASTM B124
Bar, Rolled, Pressure Vessels ASME SB96, ASTM B96
Bolts ASTM F468
Forgings, Die ASTM B283
Nuts ASTM F467
Pipe ASME SB315, ASTM B315
Plate ASME SB96, ASTM B96
Plate, Bridge and Bearing ASTM B100
Plate, Clad ASTM B432
Plate, Pressure Vessels ASME SB96, ASTM B96
Rod ASME SB98, ASTM B98, SAE J461, J463
Rod, Forging ASTM B124
Screws ASTM F468
Shapes ASME SB98, ASTM B98, SAE J461, J463
Shapes, Forging ASTM B124
Sheet ASME SB96, ASTM B96, SAE J461, J463
Sheet, Bridge and Bearing ASTM B100
Sheet, Pressure Vessels ASME SB96, ASTM B96
Strip ASME SB96, ASTM B96, SAE J461, J463
Studs ASTM F468
Tube ASME SB315, ASTM B315, MILITARY MIL-T-8231
Wire ASTM B105, B99

Fabrication:
Joining Technique Suitability
Brazing Excellent
Butt Weld Excellent
Capacity for Being Cold Worked Excellent
Capacity for Being Hot Formed Excellent
Coated Metal Arc Welding Fair
Forgeability Rating 40
Gas Shielded Arc Welding Excellent
Machinability Rating 30
Oxyacetylene Welding Good
Seam Weld Excellent
Soldering Good
Spot Weld Excellent

Physical Properties:
Product Property US Customary Metric
Coefficient of Thermal Expansion 10.0 ·10-6 per oF (68-212 F) 18.0 ·10-6 per oC (20-100 C)
Density 0.308 lb/in3 at 68 F 8.53 gm/cm3 @ 20 C
Electrical Conductivity 7 %IACS @ 68 F 0.041 MegaSiemens/cm @ 20 C
Electrical Resistivity 148.0 ohms-cmil/ft @ 68 F 24.6 microhm-cm @ 20 C
Melting Point - Liquidus 1880 F 1027 C
Melting Point - Solidus 1780 F 971 C
Modulas of Elasticity in Tension 15000 ksi 103400 MPa
Modulus of Rigidity 5600 ksi 38610 MPa
Specific Gravity 8.53 8.53
Specific Heat Capacity 0.09 Btu/lb/oF at 68 F 377.1 J/kg · oK at 293 K
Thermal Conductivity 21.0.0 Btu · ft/(hr · ft2·oF)at 68F 36.3 W/m · oK at 20 C

Sizes Available
ROUND RODS 8mm To 70 mm
HEX 10mm To 60mm
SQUARE 10mm To 60mm
FLAT 10mm Min Thickness and max Width 120mm
BILLETS Up to 200 mm
INGOTS As per Specification

Shree Extrusions Limited

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



SHREE EXTRUSIONS LTD. All Rights Reserved.