We are providing riveting brass rods for bending, blanking and riveting applications. These rods are good for cold forming operation with high machinability property. These rods are widely used for manufacturing gears, valve components, and automotive engineering parts. It is also used to produce plumbing fixtures and sanitary fittings parts due to superior corrosion resistant characteristic. Great machinability and ductility properties make these rods ideal to produce complex machine components. The rivets of these rods are perfect for architectural extrusions and building hardware. Apart from this, the offered riveting brass rods have low-friction property which does not create any spark.
Riveting Brass Rods -
Chemical Requirements | CuZn35Pb1 | CuZn35 |
Copper | 62.0 - 65.0% | 63.0 - 68.0% |
Lead | 0.75 to 1.50% | 0.02% max. |
Iron | 0.10% max | 0.05% max |
Total Imp. | 0.50% max | 0.30% max |
Zinc | Remainder | Remainder |
Physical Properties | ||||
Condition | T.S. MPa | EL% Min | T.S. MPa | EL% Min |
Quarter Hard (HA) | 325-390 | 30.00% | 340-345 | 30.00% |
Half-Hard (HB) | 400-490 | 20.00% | 420-510 | 15.00% |
Hard (HD) | 500-685 | 15.00% | - | - |
Extra Hard (HE) | 695-885 | 5.00% | - | - |
Fabrication Properties | |
Capacity for being |
|
Cold forming | Excellent |
Machinability Rating | 70.00% |
Bending | Excellent |
Riveting | Excellent |
Uses
Ductile Alloy with good combination of bending as well as cold heading properties
SHREE EXTRUSIONS LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |